 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 2SC2512 Silicon NPN Triple Diffused Application * VHF Amplifier * VHF TV Tuner, Mixer Outline TO-92 (2) 1. Base 2. Emitter 3. Collector 3 2 1 2SC2512 Absolute Maximum Ratings (Ta = 25C) Item Collector to base voltage Collector to emitter voltage Emitter to base voltage Collector current Collector power dissipation Junction temperature Storage temperature Symbol VCBO VCEO VEBO IC PC Tj Tstg Ratings 30 20 3 50 300 150 -55 to +150 Unit V V V mA mW C C Electrical Characteristics (Ta = 25C) Item Collector to base breakdown voltage Symbol V(BR)CBO Min 30 20 3 -- -- 30 -- 600 -- 16 Typ -- -- -- -- -- -- 0.35 900 -- 20 Max -- -- -- 0.5 1 -- 0.45 -- 20 -- pF MHz ps dB Unit V V V A V Test conditions I C = 10 A, IE = 0 I C = 1 mA, RBE = I E = 10 A, IC = 0 VCB = 10 V, IE = 0 I C = 20 mA, IB = 4 mA VCE = 10 V, IC = 10 mA VCB = 10 V, Emitter common, f = 1 MHz VCE = 10 V, IC = 10 mA VCB = 10 V, IC = 5 mA, f = 31.8 MHz VCC = 12 V, IC = 2 mA, f in = 200 MHz, f OSC = 260 MHz, f out = 60 MHz VCC = 12 V, IC = 2 mA, f OSC = 260 MHz, Rg = 50 , f in = 200 MHz Collector to emitter breakdown V(BR)CEO voltage Emitter to base breakdown voltage Collector cutoff current Collector to emitter saturation voltage DC current transfer ratio Reverse transfer capacitance Gain bandwidth product Base time constant Conversion gain V(BR)EBO I CBO VCE(sat) hFE Cre fT rbb' * CC CG Noise figure NF -- 3.8 5.5 dB 2 2SC2512 Maximum Collector Dissipation Curve Collector Power Dissipation PC (mW) 300 DC Current Transfer Ratio hFE DC Current Transfer Ratio vs. Collector Current 100 VCE = 10 V 80 200 60 40 100 20 0 0 100 150 50 Ambient Temperature Ta (C) 1 2 5 10 20 50 Collector Current IC (mA) Gain Bandwidth Product vs. Collector Current 1,000 Gain Bandwidth Product fT (MHz) VCE = 10 V 800 Reverse Transfer Capacitance Cre (pF) 5 Reverse Transfer Capacitance vs. Collector to Base Voltage f = 1 MHz 2 Emitter Common 600 1.0 400 0.5 200 0.2 0 1 2 5 10 20 50 Collector Current IC (mA) 0.1 1 2 5 10 20 50 Collector to Base Voltage VCB (V) 3 2SC2512 Conversion Gain vs. Collector Current 30 Conversion Gain CG (dB) 26 VCC = 12 V fosc = 260 MHz (0 dBm) fin = 200 MHz fout = 60 MHz Rg = 50 10 8 VCC = 12 V fosc = 260 MHz (0 dBm) fin = 200 MHz Rg = 50 Noise Figure vs. Collector Current 22 Noise Figure NF (dB) 10 6 18 4 14 2 10 0 2 4 6 8 0 1 2 3 4 5 Collector Current IC (mA) Collector Current IC (mA) Noise Figure, Conversion Gain vs. Oscillating Injection Voltage 10 IC = 2 mA VCC = 12 V fosc = 260 MHz fin = 200 MHz Rg = 50 20 4 CG NF 30 Conversion Gain CG (dB) Noise Figure NF (dB) 8 6 2 0 -15 10 -5 5 Oscillating Injection Voltage Vinj (dBm) 4 2SC2512 Conversion Gain, Noise Figure Test Circuit fOSC Input R2 C1 L4 Input L1 C4 L2 C2 C3 C6 C5 C7 C9 VCC L5 C8 Output R1 : 330 (1/4 W) R2 : 560 (1/4 W) L1 : 0.8 mm Copper wire with Enamel 8 Turns inside dia 3 mm L2 : 0.8 mm Copper wire with Enamel 5 Turns inside dia 3 mm L3 : 0.5 mm Copper wire with Enamel 3.5 Turns inside dia 3 mm L4 : Outside dia 5 mm used Ferrite Core, 0.2 mm Copper wire with Enamel 6.5 Turns L5 : 0.2 mm Copper wire with Enamel 13 Turns inside dia 5 mm R1 L3 VBB Parts Specification C1 : 1.5 pF C2 : 57 pF C3 : 17 pF C4 : 1000 pF C5 : 2200 pF C6 : 22 pF C7 : 80 pF C8 : 18 pF C9 : 20 pF 5 Unit: mm 4.8 0.3 3.8 0.3 2.3 Max 0.45 0.1 0.7 0.60 Max 12.7 Min 5.0 0.2 0.5 1.27 2.54 Hitachi Code JEDEC EIAJ Weight (reference value) TO-92 (2) Conforms Conforms 0.25 g Cautions 1. Hitachi neither warrants nor grants licenses of any rights of Hitachi's or any third party's patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party's rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachi's sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. 7. Contact Hitachi's sales office for any questions regarding this document or Hitachi semiconductor products. Hitachi, Ltd. Semiconductor & Integrated Circuits. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109 URL NorthAmerica : http:semiconductor.hitachi.com/ Europe : http://www.hitachi-eu.com/hel/ecg Asia (Singapore) : http://www.has.hitachi.com.sg/grp3/sicd/index.htm Asia (Taiwan) : http://www.hitachi.com.tw/E/Product/SICD_Frame.htm Asia (HongKong) : http://www.hitachi.com.hk/eng/bo/grp3/index.htm Japan : http://www.hitachi.co.jp/Sicd/indx.htm For further information write to: Hitachi Semiconductor (America) Inc. 179 East Tasman Drive, San Jose,CA 95134 Tel: <1> (408) 433-1990 Fax: <1>(408) 433-0223 Hitachi Europe GmbH Electronic components Group Dornacher Strae 3 D-85622 Feldkirchen, Munich Germany Tel: <49> (89) 9 9180-0 Fax: <49> (89) 9 29 30 00 Hitachi Europe Ltd. Electronic Components Group. Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000 Fax: <44> (1628) 778322 Hitachi Asia Pte. Ltd. 16 Collyer Quay #20-00 Hitachi Tower Singapore 049318 Tel: 535-2100 Fax: 535-1533 Hitachi Asia Ltd. Taipei Branch Office 3F, Hung Kuo Building. No.167, Tun-Hwa North Road, Taipei (105) Tel: <886> (2) 2718-3666 Fax: <886> (2) 2718-8180 Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong Tel: <852> (2) 735 9218 Fax: <852> (2) 730 0281 Telex: 40815 HITEC HX Copyright ' Hitachi, Ltd., 1999. All rights reserved. Printed in Japan. |
Price & Availability of 2SC2512
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |